Brass Brazing Alloys,Brass Alloys Manufacturers,Brazing Alloys Exporters,India

BRASS & BRONZE BRAZING ALLOYS

These are base metal alloys used for high temperature brazing of steels & tungsten carbide. Cost effective alternative to silver brazing alloys wherein high joint strength can be readily achieved. Some alloys also offer excellent corrosion resistance with high thermal and electrical conductivity. Saru Silver offers these alloys in a wide range of compositions to suit specific applications available in Wires and Rods, Strips, Wire Flattening, Wire Preforms, Strip Preforms, Granules and Spheres. With the help of the chart below, identify and compare alloys of our Brass and Bronze Brazing Alloys suited to your needs

Specifications

Saru Silver Grade of Brazing Alloy	Nominal Composition %					Melting Range	International Standards		Technical Details	MSDS
	Cu	Zn	Ni	Si	Others	°C	DIN:8513	AWS:A5.8

SIBRO	60	39.7	-	0.3	-	890-900	L-CuZn40	-	To be provided
	Sibro is for brass brazing steels, malleable cast iron, copper, copper alloy with melting temperatures greater than 950°C (Solidous), nickel, nickel alloys.

MANBRO	60	39.6	-	0.2	Mn 0.2	900-915	-	-	To be provided
	Is for copper, cast and malleable iron brazing.

NIBRO	50	39.7	10	0.3	-	890-920	L-CuNi10Zn42	RBCuZn-D	To be provided
	Primarily used for brazing tungsten carbide. It is also used with steel, cast iron and melleable iron, nickel and nickel alloys.

NIBROSIL	50	39.7	9	0.3	Ag 1	-	-	-	To be provided
	Nibro with 1% Silver to improve joint strength.

F.BRONZE	57	39	-	-	Mn 2, CO 2	890-930	-	-	To be provided
	Is suitable for brazing cemented carbide in rock drills and similar percusively loaded joints.

C.N.S.	96.6	-	2.70	0.70	-	1090-1100	-	-	To be provided
	Is most suitable for brazing carbide to rock drills.

TINBRO 1	94	-	-	-	6Sn, 0.2P	910-1040	L-CuSn6	-	To be provided
	Used on any steels, nickel and nickel alloys.

TINBRO 2	88	-	-	-	12Sn, 0.2P	825-990	L-CuSn12	-	To be provided
	Used on any steels, nickel and nickel alloys and copper materials.

CUPRO	100	-	-	-	-	1083	L-Cu	BCu-1	To be provided
	Used for joining ferrous metals, nickel base alloys and copper nickel alloys.

SARU 681	59	38.75	-	0.1	1Sn, 0.8Fe, 0.35Mn	866-888	L-CuZn39Sn	RBCuZn C	To be provided
	Used on steels, copper, copper alloys, nickel, nickel alloys and stainless steel. It is used with the torch, furnace and induction brazing process.

BRASS 5446	54	46	-	-	-	880-890	L-CuZn46	RBCuZn-AC	To be provided
	Used mainly on steels, malleable cast iron, copper and copper alloys.

SARU 470	59	39.75	-	0.25	1Sn	870-890	-	-	To be provided
	Used on steels, copper, copper alloys, nickel, nickel alloys and stainless steel where corrosion resistance is not of importance.


High Silver Brazing Alloys	Cadmium Bearing Grades \| Cadmium Free Grades \| For Tungsten Carbide Tipped Tools
Fluxes	Silver Brazing Fluxes \| Brazing, Welding & Soldering Fluxes & Pastes Super Flux Products Based on Standard Specifications
Brass & Bronze Brazing Alloys	Copper Phosphorus Brazing Alloys