Copper Phosphorus Brazing Alloys,Copper Based Brazing Alloys,Phosphorus Brazing Alloys Manufacturer,India

HOME

High Silver Brazing Alloys

Copper Phosphorus Brazing Alloys

Brass & Bronze Brazing Alloys

Fluxes

Français

Español

Deutsch

Italiano

Russian

Click here to Download Brochure

Home » Copper Phosphorus Brazing Alloys

COPPER PHOSPHORUS BRAZING ALLOYS

Self fluxing copper based brazing alloys containing phosphorus thereby facilitating brazing on copper to copper in air without the use of a flux. Use of flux recommended for copper alloys like brass and bronze. For improved ductility and electrical conductivity silver containing lower phosphorus alloys also available. Widely used in refrigeration, air conditioning and plumbing industry. Saru Silver offers these alloys in a wide range of compositions to suit specific applications available in Wires and Rods, Strips, Wire Flattening, Wire Preforms, Strip Preforms, Granules and Spheres. With the help of the chart below, identify and compare alloys of our Copper Phosphorus Alloys suited to your needs.

Specifications

Saru Silver Grade of Brazing Alloy	Nominal Composition %			Melting Range	International Standards		Technical Details	MSDS
	Ag	Cu	P	°C	DIN:8513	AWS:A5.8

SILVER 15	15	80	5	650-800	L-Ag15P	BCuP-5	To be provided
	It has low melting point with good flow. Used where narrow joint include uneven junctions, refrigeration industry, on parts such as cuplings, manifolds, brass distributors, capillary pipes. Has good mechanical characteristics at low temperature.

SILVER 6	6	88	6	695-795	-	BCuP-4	To be provided
	It is with low melting range where temperature is a factor. Fast flow, very fluid at brazing temperature and will penetrate joints with small clearances.

SILVER 5	5	89	6	650-810	L-Ag5P	BCuP-3	To be provided
	It is same as Silver 15 and economic. Used largely in the refrigeration and air conditioning industry.

SILVER 2	2	91.5	6.5	650-810	L-Ag2P	BCuP-6	To be provided
	It fills moderate gaps in poorly fit joints and has good flow. It has the ability to fill wide joint clearances at the lower end of its brazing range. At the high end of the brazing range, it is more fluid. Recommended for sanitory and refrigerating installations.

PHOS. COPPER 1	-	92.7	7.3	705-800	L-CuP7	BCuP-2	To be provided
	It is a low cost alloy with wide melting range and low fluidity. Used in sanitory, refrigeration and air conditioning industry.

PHOS. COPPER 2	-	93.8	6.2	710-880	L-CuP6	-	To be provided
	It is the most economical and used where the joint clearance is wider. Flow is sluggish.

SILVER 1	1	92.5	6.5	650-810	-	-	To be provided
	Same as Silver 2 with Lesser Silver.

Click Here to Send us Enquiries


High Silver Brazing Alloys	Cadmium Bearing Grades \| Cadmium Free Grades \| For Tungsten Carbide Tipped Tools
Fluxes	Silver Brazing Fluxes \| Brazing, Welding & Soldering Fluxes & Pastes Super Flux Products Based on Standard Specifications
Brass & Bronze Brazing Alloys	Copper Phosphorus Brazing Alloys