Brass Brazing Alloys
These are base metal alloys used for high temperature brazing of steels & tungsten carbide. Cost effective alternative to silver brazing alloys wherein high joint strength can be readily achieved. Some alloys also offer excellent corrosion resistance with high thermal and electrical conductivity. Saru Silver offers these alloys in a wide range of compositions to suit specific applications available in Wires and Rods, Strips, Wire Flattening, Wire Preforms, Strip Preforms, Granules and Spheres. With the help of the chart below, identify and compare alloys of our Brass and Bronze Brazing Alloys suited to your needs
 |
 Specifications |
|
 |
|
Saru Silver
Grade of
Brazing Alloy |
Nominal
Composition % |
Melting
Range |
International
Standards |
Cu |
Zn |
Ni |
Si |
Others |
°C |
DIN:8513 |
AWS:A5.8 |
|
|
SIBRO |
60 |
39.7 |
- |
0.3 |
- |
890-900 |
L-CuZn40 |
- |
| Sibro is for brass
brazing steels, malleable cast iron, copper, copper alloy with
melting temperatures greater than 950°C (Solidous), nickel,
nickel alloys. |
MANBRO |
60 |
39.6 |
- |
0.2 |
Mn 0.2 |
900-915 |
- |
- |
| Is for copper, cast and
malleable iron brazing. |
NIBRO |
50 |
39.7 |
10 |
0.3 |
- |
890-920 |
L-CuNi10Zn42 |
RBCuZn-D |
| Primarily used for
brazing tungsten carbide. It is also used with steel, cast iron and
malleable iron, nickel and nickel alloys. |
NIBROSIL |
50 |
39.7 |
9 |
0.3 |
Ag 1 |
- |
- |
- |
| Nibro with 1% Silver to
improve joint strength. |
F.BRONZE |
57 |
39 |
- |
- |
Mn 2, CO 2 |
890-930 |
- |
- |
| Is suitable for brazing
cemented carbide in rock drills and similar percusively loaded
joints. |
C.N.S. |
96.6 |
- |
2.70 |
0.70 |
- |
1090-1100 |
- |
- |
| Is most suitable for
brazing carbide to rock drills. |
TINBRO 1 |
94 |
- |
- |
- |
6Sn, 0.2P |
910-1040 |
L-CuSn6 |
- |
| Used on any steels,
nickel and nickel alloys. |
TINBRO 2 |
88 |
- |
- |
- |
12Sn, 0.2P |
825-990 |
L-CuSn12 |
- |
| Used on any steels,
nickel and nickel alloys and copper materials. |
CUPRO |
100 |
- |
- |
- |
- |
1083 |
L-Cu |
BCu-1 |
| Used for joining
ferrous metals, nickel base alloys and copper nickel alloys. |
SARU 681 |
59 |
38.75 |
- |
0.1 |
1Sn, 0.8Fe, 0.35Mn |
866-888 |
L-CuZn39Sn |
RBCuZn C |
| Used on steels, copper,
copper alloys, nickel, nickel alloys and stainless steel. It is used
with the torch, furnace and induction brazing process. |
BRASS 5446 |
54 |
46 |
- |
- |
- |
880-890 |
L-CuZn46 |
RBCuZn-AC |
| Used mainly on steels,
malleable cast iron, copper and copper alloys. |
SARU 470 |
59 |
39.75 |
- |
0.25 |
1Sn |
870-890 |
- |
- |
| Used on steels, copper,
copper alloys, nickel, nickel alloys and stainless steel where
corrosion resistance is not of importance. |
|
|
 |
|
 |
For MSDS read this pdf:-
See Note: More detailed specifications to be provided on customer's demand.
